KeKap

cover

GIFMaker_me.gif

Screenshot 2025-02-28 115648.png

Screenshot 2025-03-12 190856.png

Screenshot 2025-02-23 184510.png

Screenshot 2025-02-23 184521.png

Screenshot 2025-02-28 115611.png

Screenshot 2025-02-28 115638.png

Screenshot 2025-02-24 190647.png

Screenshot 2025-02-24 190635.png

Screenshot 2025-02-24 190626.png

Screenshot 2025-02-24 190617.png

Screenshot 2025-02-24 190608.png

Screenshot 2025-02-28 115629.png

Screenshot 2025-02-24 190558.png

Screenshot 2025-02-28 075536.png

plate_1.png

BASE| Snack Sandwich Quart Bags | 2.75" (70mm) tall

Same as the regular profile, but with holes cut out through all the gridfinity squares.

BASE| Snack Sandwich Quart Bags | 3.75" (95mm) tall

Screenshot 2025-02-28 075528.png

BASE| Gallon Bags | 2.75" (70mm) tall

Screenshot 2025-02-28 075515.png

BASE| Gallon Bags | 3.75" (95mm) tall

Screenshot 2025-03-02 102802.png

Same print profile as my other prints, just for the 9x2 grid size

BASE| 2 Gallon Bags | 2.75" (70mm) tall

LID | Snack Bags

LID | Sanchwich Bags

LID | Quart Bags

Prints in 2 parts. Dovetail is designed to get tighter as you push further. Ensure you set the slot on the table, and push in the dovetail from above.

LID | Gallon Bags

Screenshot 2025-07-25 172559.png

**USE FONT BEBAS NEUE IF YOU WANT TO MATCH THE OTHER LIDS

Lid_Blank (Fits 5x2 Base)

Lid_Blank (Fits 7x2 Base)

Lid_Blank (Fits 9x2 Base)

PlantPrints

PXL_20250801_201335318.jpg

I wanted the finished product to not have obvious extrusion lines so I created this print profile that has ironing enabled for top surfaces to give a cleaner finished product

LID | Sanchwich Bags w/ Ironing of top most surfaces

LID | Quart Bags w/ Ironing of top surfaces

LID | Snack Bags w/ ironing of topmost surfaces

Koolaidman82

IMG_4014.jpeg

IMG_4013.jpeg

<ul><li>Made lid size 42mm longer to be able to fit Kirkland “Gallon Plus” bags<ul><li>Now 2x8 instead of 2x7</li></ul></li><li>Be sure to use the “Gallon Plus” base as well</li></ul>

LID | Kirkland "Gallon Plus" Bags | 2x8 Gridfinity

2x8 - Kirkland Gallon Plus Size

IMG_4012.jpeg

IMG_4011.jpeg

s-l400.jpg

<ul><li>Made base size 1 block longer to be able to fit Kirkland “Gallon Plus” bags<ul><li>Now 2x8 instead of 2x7</li></ul></li><li>Be sure to use the “Gallon Plus” lid as well</li></ul>

BASE| Kirkland "Gallon Plus" Bags | 2x8 3.75" (95mm) tall

plate_2.png

Dazope

Screenshot 2026-01-25 213216.png

PXL_20260126_031948438.MP.jpg

This is the 4x2 grid 95mm tall to fit snack bags better. In the file you have both base options (solid, with holes) and both lid options (snack or blank).

All Parts For Gridfinity 4x2 Snack Bag Size 95mm Tall

3DTIMESCULPT

IMG_3700.jpeg

All parts printed perfectly but I had problems with the Gallon base. The coupling was too tight and I ended up importing the mesh in Fusion 360 and extrude the male dove tails outwards by 0.3 millimeters. Originally I uploaded the wrong model parts. Now uploaded with the standard gridfinity sizes.Use the designer settings for this print profile.

BASE| Gallon Bags | 2.75" (70mm) tall - loose coupling

ac4lt

IMG_4254.jpeg

This is the designer&#39;s two-part model merged together to print as a single object on the H series printer.The is for the 2.75&#34; high version of the bin.

gallon bin as one piece

This is the 4x2 grid 70mm tall to fit snack bags better. In the file you have both base options (solid, with holes) and both lid options (snack or blank).

All Parts For Gridfinity 4x2 Snack Bag Size 70mm Tall

IMG_4255.jpeg

This is the designer&#39;s two part model merged into one piece for the H series printers.

Gallon lid as one piece

PXL_20250801_201326127.jpg

We use breadbags frequently and they fit into the “BASE | Gallon Bags&#34; print profile in the 7x2 Gridfinity arrangement. After finding the original font used I designed this lid to match the rest of the collection. The print profile settings are defaults except that I have ironing turned on for the top layers to get a smooth finish.

LID | Bread Bags

IMG_4046.jpeg

IMG_4045.jpeg

IMG_4044.jpeg

IMG_4047.jpeg

All parts printed perfectly but I had problems with the Gallon base. The coupling was too tight and I ended up importing the mesh in Fusion 360 and extrude the male dove tails outwards by 0.3 millimeters. This model is for the tall 3.75&#34; gallon bags base.Use the designer settings for this print profile.

BASE| Gallon Bags | 3.75" (95mm) tall - loose coupling

Ent_tech_1701

PXL_20260307_135737632.jpg

Base split into 2 pieces to fit on A1 mini

Base for A1mini, Snack/Sandwich/Quart, split in 2

plate_3.png

plate_4.png

20260606_142508.jpg

Expanded the gallon base and lid to be 3 grids wide to store more bags. The initial print also had the overly tight dovetail, so expanded that .3mm as others had suggested.

Gallon Bag 3 wide, 2.75h with loosened joint

Expanded the gallon base and lid to be 3 grids wide to store more bags. The initial print also had the overly tight dovetail, so expanded that .3mm as others had suggested.

Gallon Bag 3 wide, 3.75h with loosened joint

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Please Boost if you like my designs to support me! Thank you!</boostcontent></boostme>&nbsp;I wanted my organizers to look like something that wasn&#39;t 3D printed, so I designed these to appropriately blend fashion and function..&nbsp;Please check my profile for other useful prints, or my <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/collections/5131206">gridfinity collection</a> for more options related to these. <ul><li>Sliding lid to ensure it does not come off when pulling bags out</li><li>Printed labels for clear size identification<ul><li>(11APR25) Blank Lid profiles are now available for users to download and add their own text through Bambu Studio<ul><li>**USE FONT BEBAS NEUE IF YOU WANT TO MATCH THE OTHER LIDS</li></ul></li></ul></li><li>Snack, Sandwich, and Quart Sizes take a 5x2 grid size, and is 3-¾&#34; (95mm) or 2-¾&#34; (70mm) tall (in separate print profiles).</li><li>Gallon size takes a 7x2 grid size (2 Gallon size is a 9x2 grid size), and is 3-¾&#34; (95mm) or 2-¾&#34; (70mm) tall (in separate print profiles).<ul><li>Prints in 2 parts, but I carefully designed in a positive retention T-Slot which securely holds the two halves together even when picking up and moving around!</li><li>ASSEMBLY NOTE: The Dovetails are drafted to fit tighter the further they engage. Place the female (slot) side flat on the counter top, and press the male (pin) down firmly from above. </li></ul></li><li>Reduced filament by adding holes within the gridfinity squares</li></ul>

Gridfinity Ziploc Bag Holder & Organizer w/ Labels

ASIA

Print Profile(27)

Description

Comment & Rating (1249)

License

Related Models