Rare Disease Day - HueForge

We are approaching the Rare Disease Day (the last day of February).  Rare Disease Day is the globally-coordinated movement on rare diseases, working towards equity in social opportunity, healthcare, and access to diagnosis and therapies for people living with a rare disease.

This is something of personal importance to our family and I made a few Hueforges for family and friends. Uploading it here too to raise some awareness, especially in current times. 

You can learn more about this day here: https://www.rarediseaseday.org/what-is-rare-disease-day/

Checkout other Rare Disease Day Awareness HueForges here: https://makerworld.com/en/collections/5130412

About the HueForge:

This one uses five colors (my first ever HF with more than 4 colors with my AMS Lite) and surprisingly i found it quite easy to do.

I have added a pause in the print so that you can swap first color with the last one in your AMS, if you have.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x134.69mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.4mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA BambuLab Hot Pink Transmission Distance: 5
    PLA Hatchbox Purple Transmission Distance: 2.6
    PLA BambuLab Matte Marine Blue Transmission Distance: 2
    PLA BambuLab Basic BambuLab Green Transmission Distance: 4
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
    Start with Hot Pink
    At layer #7 (0.64mm) swap to Purple
    At layer #12 (1.04mm) swap to Marine Blue
    At layer #17 (1.44mm) swap to BambuLab Green
    At layer #22 (1.84mm) swap to Jade White for the rest.