Honeycomb Shelf for Toniebox / Honeycomb Shelf for Toniebox - Free 3D Print Model

Search models, users, collections, and posts

Allpa_112

Toys & Games>Other Toys & Games

IP Report

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

Text on the front + 0.2mm layer, 2 walls, 15% infill

7.7 h

1 plate

5.0(25)

Wall mount 0.2mm layer, 2 walls, 15% infill

2.5 h

1 plate

4.8(4)

0.2mm layer, 2 walls, 15% infill

9 h

3 plates

4.0(2)

Open in Bambu Studio

Boost

110

301

466

202

Released

Description

Content has been automatically translated.

Show original

Matching wall shelf for the Toniebox for my Tonie honeycombs: https://www.printables.com/de/model/355564-shelf-for-tonie-figures-regal-fur-tonie-figuren-to

The honeycomb shelf is invisibly attached to the wall with the base plate. The honeycomb is pushed on and secured by means of a screw (e.g. M4x16) under the charging station from being pulled out unintentionally. The charging station fits snugly in the gutter, the cable is neatly led out at the bottom.

In addition, up to 6 figures can be placed magnetically. For this purpose, a washer with a diameter of 20 mm and a thickness of 1.25 mm (e.g. https://www.amazon.de/SWG-KOTFLUEGELSCHEIBEN-VZ-20-100/dp/B00LPGLF0C) is slid into the compartments provided for this purpose.

The wall mount is adapted to screws 4.5 x 40 or 5.0 x 50.

On the front, for example, the name of the child can still be wonderfully applied.

All my designs for Tonies can be found here: https://www.printables.com/en/@Allpa/collections/863549

-------------

Matching wall shelf for the Toniebox for my Tonie honeycombs: https://www.printables.com/de/model/355564-shelf-for-tonie-figures-regal-fur-tonie-figuren-to

The honeycomb shelf is invisibly attached to the wall with the base plate. The honeycomb is pushed on and secured by means of a screw (e.g. M4x16) under the charging station from being pulled out unintentionally. The charging station fits snugly in the gutter, the cable is neatly led out at the bottom.

Additionally, up to 6 Tonie figures can be placed magnetically. For this purpose, a washer with a diameter of 20 mm and a thickness of 1.25 mm (e.g. https://www.amazon.de/SWG-KOTFLUEGELSCHEIBEN-VZ-20-100/dp/B00LPGLF0C) is slid into the compartments provided for this purpose.

The wall mount is adapted to screws 4.5 x 40 or 5.0 x 50.

On the front, for example, the name of the child can still be wonderfully applied.

All my designs for the Tonies can be found here: https://www.printables.com/de/@Allpa/collections/863549