Image Wall Hanger

This is a hanger for pictures on foam, Dibond and similar materials. The hanger itself is designed so it can be attached to the picture using 50mm (2 inches( wide double sided tape. I used a strong tape which normally is meant for carpets. The two round things are simple distance holders so the picture hans at an equal distance from the wall. Possibly CA glue might do as well, but I did not test that.

I printed in PETG in the position the objects are in the 3mf file - this way the hanger will get stronger so that no layer adhesion problems occur and your image does not fall off the nail because the layers break apart. However, I do not know the maximum weight it will hold, so carefully test it if you have a heavier picture!