Bird Whistle - Singing Bird
Print Profile(4)
Description
This model is the successor to my tweeting bird that I made a year and a half ago. It is available here:
https://makerworld.com/en/models/12866?from=search#profileId-12932
The previous model is very simple, so I decided to improve it a bit.
If you like this Bird check also my Gecko Kazoo available here:
https://makerworld.com/en/models/1178480-gecko-kazoo#profileId-1188127
Instruction.
Pour water into the whistle and blow. It should be about 10 ml of water.
The bird should make modulated sounds like a real bird.
You can't see the water level through the walls of model, so you'll have to experiment a bit. The water level should be as shown in the diagram below.
For this project I used regular PLA and PLA Silk.
Important
First of all, the filament should be dry. Moisture in the filament causes tiny holes in the print, which may cause leaks. Also, do not use old filament that is brittle because it weakens the print.
It should play like the previous model which sounds like in the video below.
Media
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1238)