Adjustable Monitor Stand
Print Profile(1)
Bill of Materials
Description
It is recommended to use higher-strength materials such as PETG for printing, after all, it is a heavy monitor on top. You can scale the model up or down as needed. The default configuration is suitable for monitors up to 27 inches, 24 inches or less is recommended. If using PLA or if the monitor weighs more than 10KG, it is recommended to set the walls to 6 layers or more, and the infill to greater than 30%;
During installation, please note that the rotating handle should be tightened first, then the limiters should be installed. You can use glue or paper to secure them. Finally, attach the base, place the monitor, and then adjust the height of the monitor using the rotating handle.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)