Warhammer Spacemarine
Print Profile(0)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 100x178.32mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2.7mm and the Actual Depth is 1.7mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Chrominal Penumbra Gray Transmission Distance: 8
PLA Hatchbox White Transmission Distance: 10
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Penumbra Gray
At layer #11 (0.96mm) swap to White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)