Rotating Structural Parts Box
Print Profile(1)
Description
A Rotating Component Storage Unit
Printing Parameters:
Layer height: 0.2mm
Center shaft infill: no less than 50%
Remaining infill: 15%
Dimensions:
Large Boxes: 60x60mm, 100x100mm, 150x150mm, 200x200mm
Small Boxes: 30x30mm, 50x50mm, 75x75mm, 100x100mm
Small Box Heights: 25mm, 45mm
Additional Materials:
Adhesive
Countersunk screws: M2.5 x 10mm
Metal dowel pins: M2 x 10mm
The design principle is inspired by a woodworking project for a rotating fruit bowl found online, differing from commercially available double-layered, flower-shaped designs.
This model serves primarily as a structural demonstration and is not recommended for practical use as a parts organizer; more cost-effective options exist on the market.
However, files for larger dimensions and varying heights are included. I refrained from printing these larger versions due to concerns about warping, thus foregoing verification.
Should you choose to print larger files, it is advisable to:
1. Print a miniature version to familiarize yourself with the assembly.
2. Increase the infill density of the central shaft for enhanced strength.
3. Print individual small boxes to assess structural integrity and strength.
Multi-layered designs were not pursued due to concerns about insufficient strength in the printed central shaft.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)