Portable Monitor Stand (Height and Angle Adjustable)

This model is a highly practical and portable monitor stand, featuring adjustable height and fine-tuneable angle.

Aside from four M4 screws for the monitor's rear, no additional hardware is required.

Instructions:

• Compatible with all portable monitors featuring M4 threaded holes on the rear, with a 75mm spacing (virtually all sizes are compatible provided the screws are suitably sized; I used a 16.5-inch monitor).
• Only four M4*8 screws are needed; the model includes four 10mm screw risers for compatibility with longer bolts (avoid excessively long screws to prevent monitor damage).
• Height adjustable, up to 270mm (bottom to screen center); you can position the screen vertically or horizontally.
• The base measures 150*116mm, providing stable support.
• The connecting rod is designed for horizontal printing, resulting in superior strength and faster printing speeds; simply insert it with the arrow pointing downwards (adhesive may be used).
• Two rear bolts work in tandem for fine-tuning screen elevation and height adjustment (fine adjustments only; not designed for significant tilting; height adjustment features a locking mechanism to prevent slippage).
• All parts print without supports; the print orientation is optimized for structural integrity, resulting in exceptional robustness. I used default PLA settings and encountered no issues with strength.
• The base incorporates a textured design, and the overall lines present a sophisticated, technologically advanced aesthetic.
• This model represents my second-generation portable monitor stand; the first, a cantilever design, was abandoned after extensive use. This iteration resolves all previous shortcomings and offers a superior solution.