Alex Terrible Mask
Print Profile(1)
Bill of Materials
- M3-. x 2: nut
- M3-.5x10 x 2: screw
- M4 x 2: nut for109% scale
- M4-.5x10 x 2: screws for109%scale
Description
- Orientated so supports are only on inside of mask and teeth are stronger.
- Added support so horns don't collapse.
- Print profile is for PLA at 100% and 109% size (109% is the largest I was able to go without splitting it into pieces). 109% fits me perfectly and I'm a size 22.4 head. My filament of choice was copper silk from Geeetech (100%) and Black Blue Purple Tri Color Silk from Conjure (109%).
- Added slots where the holes are for a T style strap.
Added mounts that glue onto top and lower jaw to connect rubber bands to control jaw movement.
these are glued in place with a drop of super glue.
EDIT:
1. Changed the rubber band mounts to hooks. They print better, stronger, and easier to glue on.
2. Included the link for wall mount that everyone seems to like by Lowen_SoDium below. Please rate\boost his hanger model.
https://makerworld.com/en/models/816167-wall-hanger-for-mask-or-other-colectables#profileId-758417
3. Added some pics of another one I ran on November 14, 2025.
4. Pins do break if mask is dropped. In my experience the pins breaking saved the rest of the mask from potential destruction.
UPDATE: the link for the head strap I used is below. it is on Etsy
https://www.etsy.com/listing/4400257294/adjustable-mask-strap-kit-3-knit-elastic
This remix is based on
License
Comment & Rating (164)