Jewellery / Tool Box
Print Profile(5)
Description
This compact, 3D printable cantilever storage box features a clever design for easy access to your tools, jewellery or other small items.
It is easy to assemble, but you can download the assembly guide, if needed.
There is a large version (3-layer) and a small version (2-layer). More layers can be added by downloading the extension kit. Note that -depending on the contents- after 5 layers, the box might tip over when opened on 1 side.
Dimensions:
Large version: ±250x122x128mm (WxDxH)
Small version: ±250x122x84mm (WxDxH)
Inside dimension per compartment: ±116x116x38mm (WxHxD)
Tips:
- If you have problems with warping, make sure your buildplate is very clean, use an adhesive spray or add a full brim to the models.
- I tested the connectors with PLA basic, PLA CF, PLA matte, PLA silk and PetG HF. I didn't experience any problems, but PLA matte and silk are more likely to break. Make a test print of 1 connector in case of doubt.
- Be careful while inserting the connectors. Support the inside of the boxes while inserting the connectors.
- Make sure the lids are cooled down completely before assembling. If the material is still warm, it can permanently bend.
Filaments used:
- Bambulab PLA Basic Beige & Bambulab PLA Basic Hot Pink
- Bambulab PLA Wood Classic Birch & Bambulab PLA CF Black
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (50)