Modular Blowgun (Extremely Powerful!)

Model Descritpion

This is a modular blowgun designed for “Becoming a hunter” contest.

16/03/2025: 

Added mouthpiece protection to avoid dart inhalation.

NOTE: First insert the dart inside the mouthpiece and immediately add this protection.

Added new profiles for Rifled Modular Blowgun and only Rifled Darts.

The rifling continue between tube sections without any misalignement.

A special rifled dart has been released also: 

NOTE: all parts are compatible with each other.

08/03/2025: Added A1-mini sections tube on main profile.

07/03/2025: Added Scope (two types: Cross and Line)

06/03/2025: Added the Darts Holder and transport bracket.

The blowgun is composed by the following parts:

Because Darts are small it is better to do not give these parts to children under 10 Year.

I suggest to make more safe darts using e.g. papers like below:

NOTE for printing Darts:

A dedicated profile is available for 4x build plates with option: 12x , 25x, 50x, 100x Darts.

I suggest to print darts following these steps:

1. first time print only one or few darts.
2. check if darts work correctly with your printed blowgun.
3. if necessary do a small adjust by very little scaling.
4. if darts are ok you can start to mass production….

Assembly is easy thanks to bayonet mount on each sections and mouthpiece.

Final Result is a over 600mm Blowgun (which can be increased easily printing new sections):

It is also possible to print the trasnport bracket to facilitate the transportation:

A very useful Darts Holder has been added as additiona printing profile for store up to 27 darts (rifled darts only 9pcs max).

A scope (two types: cross and line) has been provided:

Insert/remove the scope as illustrated by the yellow arrow.

Enjoy it! Do not forget to boost this model if you like it!