A set of cheese car air freshener (printable without AMS)

This is a car cheese air freshener decoration.

There are three in total. Very cute.

Installation requires the purchase of 5*2mm round small magnets. Pay close attention to the north and south poles during installation, do not install them incorrectly.

After installing the magnets, they are even three very handy magnetic pushing card toys, you can try it.

Each small cheese has diffusion holes, suitable for different sizes of round diffusers. Diameter range is 26-36mm, thickness 5mm.

In addition, the printing configuration cheese body and bracket are in two separate files, because the layer height is different. This will print much faster than a single plate.

The bracket has two thicknesses to fit most vehicles on the market's air outlets. Adjust it yourself.

If you only need decorative parts, you can print my model, portal Multiple thickness adaptation car air outlet clip + a set of cheese decoration ornaments dolls (printable without AMS) from hek - MakerWorld

The car clip is universal. Thank you all for your liking.

The cheese and bracket are slightly tight during installation, after all, it is something used in the car, loose will fall off, affecting driving safety. I hope you understand.

When you need to change the cheese style, just shake it left and right to take it off, do not forcibly pry the air outlet clip foot.

Regarding my model, you can communicate with me if you have any suggestions or opinions, and I will try my best to provide feedback. Modeling and printing is not easy, I hope you can understand.