Honkai Impact 3rd: Fu Hua Bookmark
Print Profile(1)
Description
Honkai Impact 3rd themed bookmark: Fu Hua
Dimensions: 40*120mm
Thickness: Approximately 2mm
Bookmark lanyard hole diameter: 3mm
100% infill print, layer height 0.08mm, first layer 0.16mm
The bookmark's print parameters have already been adjusted. Users with AMS can download and print directly.
Users without AMS can refer to the color change instructions below and add pauses to change colors at the corresponding layers!
If you like it, download it quickly, and remember to come back and comment with a picture!
If you have any favorite characters, you can also leave a message in the comments section and let me know! I will also design and upload them!
Note: A 0.4 nozzle is used, so the strokes of some text will not be obvious. For higher quality details, a 0.2 nozzle can be used for printing.
The bookmark uses four filaments
Bambu Lab PLA basic Black
Bambu Lab PLA basic Blue Gray
Bambu Lab PLA basic Gray
Bambu Lab PLA basic White
Color change instructions:
Starting with black
At layer 10 (0.88mm), change to blue gray
At layer 16 (1.36mm), change to gray
At layer 19 (1.6mm), change the remaining part to white.
Boost Me (for free)
Thank you for your support! Please boost me!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)