Pokémon—Sprigatito

This model was printed with substitute filaments due to a shortage of the correct colors, so please do not emulate my color scheme

A 20cm Sprigatito Pokémon figurine(pre-split) requiring no AMS or painting to create your own Pokémon model

Of course, for the convenience of those with AMS who wish to avoid multiple printing stages, I've also created a multi-color version, selectable as the second print profile in your print settings

For resin printing, the STL file is also available for single-color printing on monochrome printers

This model is compatible with Bambu P1S, P1P, X1, and A1 series printers; A1 mini users may need to adjust the model size

The filaments used are: Lime Green, Green, White, Peach, Pink, and Black

Monochrome printers require separate printing and assembly

I used Eryone PETG and Polymaker PLA, but feel free to adapt the color scheme and select filaments according to your preferences; Bambu's own filaments are, of course, ideal

For monochrome printing, a 0.2mm layer height with 15% or 10% infill is recommended. For multi-color AMS printing, 0.16mm layer height is suggested; however, 0.08mm will yield superior results, though at a considerable increase in printing time

I have also printed the all-in-one version, shown below:

Separate model parts

Assembly instructions: Glue is required for all parts except the ears