Dimpled Sloper Climbing Hold
Print Profile(2)
Description
Disclaimer: Use at your own risk. There is no certainty of print quality. I have had no issues with strength or delamination, but your holds may break on you.
Hold is designed to be mounted with #8 screws. You definitely want to make sure the flange for the screws is printing correctly.
This is a sloper with two dimples and a rounded cutout in different spots, to allow for a variety of configurations. I placed mine on the wall with the larger cutout on bottom so it could be used as an undercling and a sloper. I used PETG but you want to make sure you like the texture first as this is a lot of plastic. I've found rubbing chalk into 3D printed holds drastically improves the grip, but doubly so for this one to get friction as a sloper.
I increased walls and decreased infill and haven't noticed any compromise in strength so far.
Video of this in use:
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)