Washington D.C. 3D Miniature

Large Multi-Color 3D miniature of Washington D.C.!

This miniature has been completely re-created for improved printability & full multicolor support! 🎨

Check out my collection of other Large miniature cities: https://makerworld.com/en/collections/468505-large-miniatures

Collection of all my miniatures: https://makerworld.com/en/collections/146964-all-miniatures

Slicing & Coloring Details

The filament colors used in the pictures are based on personal preference and the filaments I had available.

Try customizing all six colors—terrain, roads, buildings, vegetation, water, and the frame—to suit your style!

This model was designed to be printed with a 0.4mm nozzle and 0.16mm layer heights.

Try using a 0.2mm nozzle (0.08mm layer heights) for even finer detail!

Note: If roads are disappearing after slicing, try or lowering the extrusion/line width of external perimeters (outer walls) closer to 0.4mm OR use Arachne walls.

Framing Details

This model measures almost exactly 7.5x9.5in (242.31mm X 191.08mm) and should fit most 8x10 frames (assuming frame lip/overlap is around a half-inch). Feel free to change the scale/size of the model(s) to meet your needs.

I also included a large printable frame (w/ 1mm water plate) designed to fit my large miniature cities!

Note: This is a “large” miniature and will not fit the smaller ~5x7inch printable frame included with the other miniature cities!

Personally I use these cheap wooden frames from Amazon: https://www.amazon.com/dp/B0B1CNJL7N

And blue printer paper: https://www.amazon.com/dp/B00006IDQT

A frame is not required! This model looks great by itself and can be displayed almost anywhere.