Search models, users, collections, and posts
Print Profile(3)
Only Body 0.2mm layer, 3 walls, 15% infill
Designer
2.8 h
1 plate
Only Cap 0.2mm layer, 3 walls, 15% infill
Designer
33 min
1 plate
Body + Cap 0.2mm layer, 3 walls, 15% infill
Designer
3.2 h
1 plate
Open in Bambu Studio
Boost
414
873
67
21
859
453
Released
Description
It is a medium-sized antnest with several chambers and a humidification tank with great autonomy ( even more than a week at 20/25°C), the water tank is connected to the rest of the nest by micro holes.
All you need to build it:
- a (10 * 10)cm acrylic/plexiglass sheet (I used one of a 2mm thick photo frame)
- 3 screws (m3*20mm) +1 screws (m3*30mm) and nuts
- 10/11mm external diameter tube (to connect the nest to the arena) (my tube is external diameter 11mm/ internal diameter 8mm and fits perfect)
Print files explanation:
- Body + Cap (same color, not fitting in A1 mini)
- Only Body (print in white) - A1 mini OK
- Only Cap (print in black or a dark to prevent light to go inside a disturb ants) - A1 mini OK
Print setup:
- 0,2mm layer height
- use supports and print it in normal position
- use standard Pla, I used white for the nest and black for the cover to prevent the light from going inside
Have fun :-)
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (67)