Ofally

cover

IMG_7375.jpg

plate_1.png

2025-03-12_31bab3cfd9711.gif

0.2mm layer, 2 walls, 15% infill

Same thing but I sized it down to 90%

A1 Mini

Lubis_Druckwerkstatt

1.jpg

2.jpg

Ich habe den Verschluss der Auslösung minimal verändert, dadurch hält er etwas besser und löst nicht direkt aus.

I have slightly modified the trigger mechanism; as a result, it now holds a bit better and does not release immediately.

Adjusted trigger release

Muhlakai

Photo Jul 17 2025, 10 42 02.jpg

When I first pulled this up in Bambu Studio I thought I could rearrange the pieces and scale them up. …which I did by about 10%. Then I thought I could do the same thing again …which I did. Then I did it a third time. The end result is about a 133% sized print on a single plate. Fair warning: the jaw away from the trigger tends to be lifted up about halfway by the spring arms, so it doesn&#39;t lay flat anymore. …but it still looks awesome and lives on my desk, now. I recommend grabbing the “adjusted trigger arm” from the print profile of the same name and increasing that to about 130-133%, too.

Enlarged (and rearranged) to fill the ENTIRE 255x255 plate

Spikes, pins, and base

Clips and pan

plate_2.png

swag

IMG_7922.JPEG

Multiple plates multicolor print that also supports a1 mini with 100 percent size with out downscaling.

100 percent size a1 mini friendly no ams friendly multicolor

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

I hope you guys enjoy this model of the bear trap. It is fully printable. Enjoy!<boostme><boosttitle>Boost Me</boosttitle><boostcontent>I know they changed some stuff with the boosting system, but if you were to boost, it would be so helpful.</boostcontent></boostme> Warning: It can hurt people if you are not careful

Print Profile(5)

Description

Comment & Rating (761)

License

Related Models

Bear Trap (fully printable)

Print Profile(5)

Description

Comment & Rating (761)

License

Related Models