【Iron Man's Arc Reactor】Glows! Exquisite Print-in-Place Design!

This is a small model, modeled and created based on the first-generation Arc Reactor Tony built in the cave in Iron Man 1, with incredibly high fidelity! And it lights up.

【Printing Instructions】

1、Clean your print bed before printing to avoid first-layer adhesion issues, as some parts have a relatively small contact area with the print bed and require good first-layer quality for optimal printing results.

2、If you want it to light up, you'll need a Bambu Lab standard 3D-printed LED light - Ring LED magnetic light, Bambu Lab Ring LED magnetic light - White light. It's available at the Bambu Lab store on JD.com for 16.4 yuan. If you don't have this component, this model still makes a beautiful Iron Man Arc Reactor display piece!

3、When removing the display stand supports, be caretul to avoid breaking the printed support pillars.

【Installation Guide】

1、Place the ring LED magnetic light into the lower compartment. Note that if your ring LED magnetic light is slightly too large or small, it's normal, as there's significant diameter variance in this official Bambu Lab part. The official website lists a diameter of 18mm, but mine is noticeably larger. Therefore, I've added a larger tolerance. If yours is still slightly too large, you'll need to sand it down before inserting it.

【About Me】

If you like this model, please give me a small like, and of course, any support would be even better. I will develop more interesting and refined models.

I am a 3D printing beginner; every bit of support you provide will be a stepping stone towards my future Bambu Lab career (a wishful thought).