Franken 3D

cover

IMG_1587.JPG

IMG_1588.JPG

Two Way Part 1

plate_1.png

Two Way Part 2

plate_2.png

One Way Part 1

plate_3.png

One Way Part 2

plate_4.png

IMG_1589.JPG

Impossible Passthrough Easter Egg

PolyReelStudio

IMG_5708.JPG

IMG_5709.JPG

[<a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/@PolyReelStudio">PolyReel</a>] : This profile is individually tuned for this model to balance optimization and quality. &nbsp;Single plate - single pass-through version only for A1 and A1 MINI&nbsp;This profile is configured for the single pass-through version with both components arranged on a single plate. Adjustments focus on maintaining smooth movement while improving surface consistency.Speeds have been adjusted, and in some areas while being kept modest, to maintain efficiency without sacrificing surface quality. Infill has been modified using infill combination with a concentric pattern to improve efficiency while maintaining structural consistency.Line widths and wall behavior have been refined to better resolve geometry, and very slight variable layer height is applied at the top to reduce visible layer lines.Tested with PLA and PETG.<h2>Print Settings:</h2><ul><li>Supports: None required</li><li>Speed: Adjusted for quality and efficiency</li><li>Infill: Concentric with infill combination</li><li>Variable Layer Height: Enabled</li><li>Plate Layout: Both parts on a single plate, Print by object config</li><li>Materials: PLA, PETG</li><li>Concentric infill at 15%</li><li>layer height 0.16</li></ul>&nbsp;A1 and A1 MINI By Object Profile

[By Object] [Single Plate] A1, A1 Mini - Passthrough Egg

IMG_5718.JPG

IMG_5723.JPG

Single plate - single pass-through version only for P2S&nbsp;This profile is configured for the single pass-through version with both components arranged on a single plate. Adjustments focus on maintaining smooth movement while improving surface consistency.Speeds have been adjusted, and in some areas while being kept modest, to maintain efficiency without sacrificing surface quality. Infill has been modified using infill combination with a concentric pattern to improve efficiency while maintaining structural consistency.Line widths and wall behavior have been refined to better resolve geometry, and very slight variable layer height is applied at the top to reduce visible layer lines.Tested with PLA and PETG.<h2>Print Settings:</h2><ul><li>Supports: None required</li><li>Speed: Adjusted for quality and efficiency</li><li>Infill: Concentric with infill combination</li><li>Variable Layer Height: Enabled</li><li>Plate Layout: Both parts on a single plate, Print by object config</li><li>Materials: PLA, PETG</li><li>Concentric infill at 15%</li><li>layer height 0.16</li></ul>*MakerWorld requires separate print-by-object profiles catered to specific printers.

[Single Plate] [By Object]  P2S - Passthrough Egg

IMG_5716.JPG

IMG_5722.JPG

Single plate - single pass-through version only for P1S, P1P, X1, X1 Carbon and X1E&nbsp;This profile is configured for the single pass-through version with both components arranged on a single plate. Adjustments focus on maintaining smooth movement while improving surface consistency.Speeds have been adjusted, and in some areas while being kept modest, to maintain efficiency without sacrificing surface quality. Infill has been modified using infill combination with a concentric pattern to improve efficiency while maintaining structural consistency.Line widths and wall behavior have been refined to better resolve geometry, and very slight variable layer height is applied at the top to reduce visible layer lines.Tested with PLA and PETG.<h2>Print Settings:</h2><ul><li>Supports: None required</li><li>Speed: Adjusted for quality and efficiency</li><li>Infill: Concentric with infill combination</li><li>Variable Layer Height: Enabled</li><li>Plate Layout: Both parts on a single plate, Print by object config</li><li>Materials: PLA, PETG</li><li>Concentric infill at 15%</li><li>layer height 0.16</li></ul>*MakerWorld requires separate print-by-object profiles catered to specific printers. &nbsp;

[Single Plate] [ By Object] P1S, X1C, - Passthrough Egg

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

This 3D-printed Easter egg features an impossible-looking passthrough design with a mesmerizing spiral split. At first glance, the two halves seem completely disconnected and impossible to reassemble - but with a simple twist along the axis, they seamlessly screw together! A perfect illusion piece to surprise and impress, blending clever engineering with holiday fun.&nbsp;Check out my other designs:&nbsp;<a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/1212379-impossible-passthrough-bambu-ball-fidget#profileId-1227514"><img class="image_resized" style="width: 50.08%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000001209241/design/2025-03-15_bc569bc49294b.jpg"></a><a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/1209199-geometric-lattice-easter-eggs#profileId-1223613"><img class="image_resized" style="width: 50.05%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000001209241/design/2025-03-14_34df324405377.jpg"></a><a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/1209259-bambu-ball-filament-display#profileId-1223683"><img class="image_resized" style="width: 50%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000001209241/design/2025-03-14_3de139ef0b5e48.jpg"></a>

Impossible Passthrough Easter Egg Fidget

ASIA

Print Profile(4)

Bill of Materials

Description

Comment & Rating (327)

License

Related Models