Meyui

cover

TS_2.png

TS_3.png

TS_1.png

TS_4.png

TS_5.png

Drawer Base

plate_1.png

Kumiko Panel

plate_2.png

Standard Lid

plate_3.png

Magnetic Lid

plate_4.png

Rectangle Tissue Box- Kumiko Style

CDP_YYC

Spacer 1.jpg

Spacer 2.jpg

This insert is sized for the larger size version of this facial tissue box that fits Costco Kirkland brand facial tissue…. I provided scaling information for that in my boost post with photos in the comments sections below.  If you&#39;re printing the original size version of the tissue box, you&#39;ll need to resize my print profile. Just measure the size of your facial tissue and scale the X and Y dimensions in Bambu Studio to resize it.  I find that when my tissue level gets down to the last third, that they sometimes slip back down inside and away from the top. I made this quick spacer insert for my Costco Kirkland brand facial tissue. It uses very little filament as the infill percentage is extremely low. It also has finger grip recesses to make it easier to insert and remove as needed.  If you don&#39;t use Costco facial tissue, just measure the size of your facial tissue and scale the X and Y dimensions in Bambu Studio to resize it.  I use white PLA filament (basic or matte both work fine), since when viewed from the outside, the colour is nearly identical to that of the facial tissue, so the spacer is very unobtrusive.  Unless you know to look for it, you wouldn&#39;t even notice it&#39;s there

Tissue Box Spacer Insert

Drawer Base with screw holds

Side panels

pdeb

IMG_9864.jpg

IMG_9863.jpg

IMG_9860.jpg

IMG_9861.jpg

IMG_9862.jpg

A shorter version to fit Kirkland tissue box with size 23x12x5cm. Since scaling the height was too much, I adjusted the side panels in MS 3D builder to make it shorter without messing up the design by scaling it too much. The x and y axis are scaled marginally to fit the tissue box.&nbsp;I also added a version with screw holes at the back as I wanted it mounted on the wall. The profile has both options - with and without screws. &nbsp;Credits go to original designer. Love it and had to learn 3D builder to adjust it to my needs. Hope it helps someone else&gt;

Shorter version

PandaCasting

997a93e0-f5ad-11f0-bf52-25fc948dc967.jpg

WhatsApp Image 2026-01-19 at 7.22.18 PM.jpeg

WhatsApp Image 2026-01-19 at 7.22.03 PM.jpeg

WhatsApp Image 2026-01-19 at 7.21.52 PM.jpeg

9978bf20-f5ad-11f0-bf52-25fc948dc967.jpg

997340e0-f5ad-11f0-bf52-25fc948dc967.jpg

Struggled to scale up the original model to fit the large Kleenex branded box from Amazon and Costco (USA Kleenex product). The overhangs and some of the side walls weren&#39;t obvious when trying to measure it in BL Studio. After about 4 print attempts, here&#39;s the sweet spot I found that fits with the large Kleenex product without having to remove the tissues from the box to place into the model. As is, this may be too large a print for 256x256 build plates but you could probably shave the width down by 9mm to make it fit exactly on plates for X1/A1/P1/P2. Works great on all H2 series printers.

USA Large Kleenex Brand 0.2mm layer, 2 walls, 15% infill

S1lent

Schermafbeelding 2026-02-27 071845.png

Improved lid, combining the standard and magnetic version. The magnetic version has a bit of trouble staying in place when pulling out a tissue, and due to the somewhat flimsy base, there is a chance the box won&#39;t properly allign with the lid. This profile combines best of both worlds, holding the box together and the lid in place, whilst keeping the magnetic feature of the lid.&nbsp;0.16mm, 15% gyroid, outer-inner wall.&nbsp;&nbsp;

Magnetic and standard lid combination

Main Box

Test Print

knolly

IMG_2818.JPG

IMG_2819.JPG

IMG_2820.JPG

I love this box but found that when it is printed in PLA, the tall walls start to sag outward over time (like over several months) and the lid no longer snaps on top. As an experiment I assembled the walls as a single box and printed it. It prints great PLUS I think the kumiko pattern takes on a slightly different character when printed vertically that is really neat.&nbsp;Other adjustments to this profile are:<ul><li>Added some raised feet to the bottom of the box</li><li>Print lid right side up with PETG support material for the top finish I desired</li><li>A test print wall piece for the vertical print - I found different layer heights gave slightly different looks to the pattern</li></ul>Overall just random tweaks that COULD be solved with glue but I found it fun to do it all in the printer. Love the model!

130 mm ID Tall - Single Piece for Dual Extruder Printers

plate_5.png

plate_6.png

ShapeCrox

Screenshot 2026-06-01 182817.png

Screenshot 2026-06-02 225939.png

Screenshot 2026-06-02 230625.png

Screenshot 2026-06-02 230737.png

I used the Pandacasting printing profile and added dovetailed sections so that it can be printed on a smaller printer and then assembled. 0.2mm layers 2 walls 15% infill - superglue reccomended to connect main box, lid stays together without - Added pictures of the dovetail alignment for anyone interested - Hope this helps someone out! Tested with PLA, would probably work with PETG or other filaments as well.

USA Kleenex scaled (Pandacasting) Dovetailed for P1S

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

I designed this Kumiko-style tissue dispenser to combine traditional craftsmanship.The magnetic lid design, in particular, makes refilling tissues effortless while maintaining a sleek appearance.   Key Features:<ul><li>Dual Lid – Choose between a magnetic lid for quick access (requires four D5x3mm round magnets) or a standard lid.</li><li>Kumiko Design Style – Inspired by traditional Kumiko woodworking patterns.</li><li>User-Friendly Design – The dual lid options make replacing tissues effortless, enhancing both convenience and style.</li></ul>Inner Dimensions: L210 x W99 x H98 mm  This Kumiko-style tissue dispenser has brought both beauty and practicality to my space.I hope it becomes a functional and elegant addition to your home or workspace! Enjoy!<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Thanks for your support!</boostcontent></boostme>

Tissue Dispenser, Rectangular, Asanoha Pattern

ASIA

Print Profile(7)

Bill of Materials

Description

Comment & Rating (109)

License

Related Models