Print Profile(1)
Bill of Materials
- Natural x 1: PolylitePLA
Description
Boost Me (for free)
Thank you to everyone that supports me, it truly inspires me to make more creative and fun designs!
This piece is intended to be mounted to the wall
Both print profiles are 4 colored prints. One with Bambu Lab Purple PLA, the other with Polylite Natural PLA.
Light Installation
- Put aluminum (shiny side up) at the bottom of the baseplate, adhere with glue.
- (Skip if you don't plan on using a grommet for the wire hole) Get a 16mm Closed Grommet, cut a thin line down the middle, but don't cut it entirely in half.
- Insert led strip, install along the walls of the print, cut to size.
- (Personal preference to ensure longevity of adhesive) Hot glue along the lines of the led strip, grommet hole
- Insert faceplate.
Sip on a nice cold beer and admire your handiwork.
**I highly recommend turning retraction settings on if you haven't already. Its a vital setting to have on for these light displays. It helps eliminate the chances of blobs or stringing.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)