Vileda Surprise / Gimi Aliante Drying rack Repair - Free 3D Print Model

Search models, users, collections, and posts

Fab_ster

Household>Other House Models

IP Report

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 20% infill

Designer

31 min

1 plate

4.2(9)

Includes 2 matching Screws and Nuts (print-in-place)

52 min

1 plate

4.6(5)

Open in Bambu Studio

Boost

258

208

145

Released

Description

Repair Part for Vileda Surprise / Gimi Aliante Drying Rack

Over time, the middle rods of this drying rack tend to break at the poorly designed connections. This repair part clamps the rods back to the frame – no more sagging!

🔧 Required Hardware:

2x M3 countersunk screws (25 mm)
2x M3 Nylock nuts

📌 Printing Instructions:

Simply duplicate both halves if you need more.
Print without supports.
Print the upper half with the countersunk side facing up for a better surface finish on the arch.

📸 Note:
The prints shown in the picture are from the prototype stage. The final version is now correctly oriented on the print plate and optimized for strengh in the print profile.

Enjoy printing and repairing! 😊

Boost Me (for free)

Give me a Boost if this Print was Helpful! <3

Comment & Rating (16)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.