Glass Cover
Print Profile(6)
Description
Description:
Here you will find a practical cover for a glass, cup, or similar, which can be used well as insect protection, for example, in summer.
The different animal head stoppers are also very good for keeping drinks apart :-)
Material:
I used TPU with a shore hardness of 95A. This prints well and still offers sufficient flexibility to insert the stoppers.
I printed the stoppers from PLA.
Note:
If you print the TPU cover on a smooth plate (I used the Bambu Lab Smooth PEI here), you get such good adhesion to a glass that it can even be lifted fully filled :-)
To easily remove the TPU from the plate, I recommend applying a little pure alcohol, such as ethanol or isopropanol, to the edges after printing and then gently running a scraper underneath. You may need to spray some more alcohol under the beginning and wet the scraper; then it comes off quite well and without destruction.
Assembly:
The stoppers must be screwed into the TPU cover with some pressure. It is best to slightly cup the TPU over a hand.
I didn't want the fit to be too loose here, as the stoppers should also hold and not fall out every time you lift it or the cover is firmly sucked on ;-)
Boost Me (for free)
If you like the model and the profiles, please give me a thumbs up or boost :-)
I would also be very happy to see pictures in the comments, now have fun printing.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)