Springtime Flower Truck Welcome Sign

I found BossX1000's Welcome Spring truck decoration decor model and decided I'd like to try making a Hueforge remix of it. I was unable to print their model because there was no print profile and I was unable to read the included DXF file with any utility I tired.

My son bought an 8 pack of DO3D filaments for my birthday so I decided to use most of those colors. Since DO3D filaments aren't in the Hueforge database yet I picked the colors that were closest to the ones I have on hand and it turned out fine. The actual DO3D colors are included in the description file.

I decided not to use my AMS and having to assign more that one color per slot and used the external spool and added pauses at the appropriate layers from the description file. It's a little tricky to unload the filament that's just been used and load the next color and make sure that it's extruding so you might want to try making a smaller sign to test print and resizing the x & y to 50% and leaving the Z alone.

I used SmashD's super fast, reliable slicing profile which worked really well.

Description File:

Project: spring_truck_225mm.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 225x225mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3 (Kingroon Black PLA)
    PLA Kexcelled Cyan Transmission Distance: 4 (DO3D Sky Blue)
    PLA BambuLab Matte Lilac Purple Transmission Distance: 2 (Elegoo Purple PLA)
    PLA Prusament Lipstick Red Transmission Distance: 3.3 (DO3D Rose Red)
    PLA Jessie Premium Limer Green Transmission Distance: 1.3 (DO3D Lime Green)
    PLA Overture Pink Transmission Distance: 3.2 (DO3D Pink) 
    PLA Overture Space Gray Transmission Distance: 2.1 (Elegoo Space Grey)
    PLA BambuLab Matte Ivory White Transmission Distance: 3.5 (DO3D Ivory)
This print uses 8 unique filaments

Swap Instructions:
    Start with Black (Kingroon Black PLA)
    At layer #8 (0.72mm) swap to Cyan (DO3D Sky Blue)
    At layer #11 (0.96mm) swap to Lilac Purple (Elegoo Purple PLA)
    At layer #14 (1.2mm) swap to Lipstick Red (DO3D Rose Red)
    At layer #15 (1.28mm) swap to Limer Green (DO3D Lime Green)
    At layer #16 (1.36mm) swap to Pink (DO3D Pink) 
    At layer #20 (1.68mm) swap to Space Gray (Elegoo Space Grey)
    At layer #22 (1.84mm) swap to Ivory White for the rest. (DO3D Ivory)