Cute Squirtle Samurai
Print Profile(4)
Description
Boost Me (for free)
Let me know if you like this model by boosting it
Please do not resize the height of this model.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 199.52x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2.6mm
Filaments Used:
PLA PolyTerra Army Blue Transmission Distance: 0.3
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA BambuLab Basic Brown Transmission Distance: 2
This print uses 4 unique filaments
Swap Instructions:
Start with Army Blue
At layer #8 (0.72mm) swap to Jade White
At layer #13 (1.12mm) swap to Ice Blue
At layer #16 (1.36mm) swap to Brown
At layer #22 (1.84mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (10)