Search models, users, collections, and posts
Adjustable doll stand for Rainbow / Monster High
IP Report
Print Profile(2)
0.2mm layer, 4 walls, 35% infill
1.1 h
1 plate
0.2mm layer, 4 walls, 35% infill
1.3 h
1 plate
Open in Bambu Studio
Boost
188
429
56
31
656
442
Released
Description
Print in the suggested orientation, with at least 3 Walls and 15 % infill.
Assembly:
- Insert the shaft into the base. This may require a little bit of force, as the tolerances are fairly tight.
- Insert a M3 bolt of at least 8 mm into the bottom of the base plate to fix the shaft to the base.
- Insert a M3 nut and bolt in the clip as shown in the picture. The bolt should be at least 8 mm long.
- put the clip on the shaft and use the bolt to fix it at the desired height.
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (56)