M12 Battery Holder - Angled Wall Screw Mount
Print Profile(1)
Description
Simple, easy to mount, M12 battery holder. Two orientations provided. The orientation 1 model is the one shown in the pictures. This model minimizes the distance the battery sticks out from the wall, so that's the one I went with. I mounted it using a simple drywall screw to the wood leg on my workbench. Prints easy in PLA or PETG with no supports needed. If you're going to mount this in the back of work vehicle I would use PETG due to how hot vehicles can get in the summer while sitting in the sun, otherwise PLA is fine.
I have a similar design for the M18 batteries if you're interested: https://makerworld.com/en/models/1235210-m18-battery-holder-screw-mount#profileId-1254723
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (17)