KRYO3D

cover

IMG_0135.jpg

IMG_0136.jpg

IMG_0137.jpg

IMG_0138.jpg

Screenshot (103).png

Screenshot (104).png

IMG_0597.jpeg

IMG_0596.jpeg

IMG_0595.jpeg

plate_1.png

2025-03-23_f087461c45ff2.jpg

<ul><li>0,2mm Schichthöhe</li><li>keine Stützen</li><li>10% Infill</li><li>3 Wände</li></ul>&nbsp;

<ul><li>0.2mm layer height</li><li>no supports</li><li>10% infill</li><li>3 walls</li></ul>

3 build plates

NEU Platz für 5 Bauplatten

NEW Space for 5 Build Plates

5 Build Plates

cmdrsabre

Bildschirmfoto 2025-05-21 um 23.09.42.png

Bildschirmfoto 2025-05-21 um 23.09.57.png

Same as original, but with longer hooks, so it hangs lower.

0.2mm layer, 3 walls, 10% infill - long hooks

Bildschirmfoto 2025-05-21 um 23.11.36.png

Just longer hooks for the original design, so you can hang it lower.

0.2mm layer, 3 walls, 10% infill - long hooks only

ab-foliendesign.de

20260115_194310.jpg

20260115_194452.jpg

Erweiterung für den Bauplattenhalter für diejenigen, bei denen die Bauplatten, wie bei mir, hin und wieder aus dem Halter rutschen. Der “Stopper” wird einfach vorne angeklemmt.

Extension for the build plate holder for those whose build plates, like mine, occasionally slide out of the holder. The "stopper" is simply clipped on at the front.

0.4mm nozzle, 0.2mm layer, 2 walls, 15% infill

plate_2.png

btmedic04

20260328_102246.jpg

20260328_102319.jpg

20260328_102004.jpg

20260328_101505.jpg

I was limited on space and the 3 plate holder was a bit close, so I cut the model down to hold 2 plates and mirrored it so it sits on the left hand side of my printer.

Mirrored 2 Plate Holder ASA 0.2mm layer, 3 walls, 10% infill

Plate holder one plate

Print to test fit

Eric

IMG_5550.jpeg

IMG_5549.jpeg

IMG_5548.jpeg

IMG_5547.jpeg

Includes alternate brackets that lock onto the accessory mount using sliding pieces. I&#39;ve also removed a couple mm of thickness for a thinner overall profile and to save some time and material. &nbsp;There&#39;s a test plate included you can use to test the fit of both the brackets and the dovetail connection to the main piece. Adjust the width of the brackets slightly if you&#39;re not getting a tight fit with the dovetail. &nbsp;I recommend using a smooth plate for the brackets so the finish matches more closely with the main piece.

Locking brackets and thinner profile

Niclas

20260419_182819.jpg

20260419_182753.jpg

I made a build plate spacer in the same design as the holder itself. &nbsp;My build plates rattled too much without any upper support. &nbsp;8% infill was just for prototyping but should be enough as it doesn&#39;t have any load.

3 Build Plate Spacer 0.2mm layer, 2 walls, 8% infill

You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.

This user content is licensed under the MakerWorld Exclusive License.

<commercialme><commercialtitle>Membership</commercialtitle></commercialme>ERWEITERUNGS UPDATEFür alle die meine Bauplattenhalter nutzen, gibt es jetzt eine fantastische Erweiterung!Seht es euch an, <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/de/models/2724492-schubladenerweiterung-zu-v5-ams-glas-slim-riser#profileId-3018644">hier gehts lang!</a>&nbsp;&nbsp;UPDATENeues Druckprofil hinzugefügt mit einem Bauplattenhalter mit Platz für 5 Bauplatten!&nbsp;Ich habe hier einen Bauplattenhalter designt der passend für @Sanja3D ´s (<a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/de/@Sanja3D">Sanja 3D | Veröffentlicht - MakerWorld</a>) V4 AMS Glas Slim Riser ist.Er kann seitlich eingehängt werden und hat Platz für 3 Bauplatten.Der Druck benötigt keine Stützen.Viel Spaß beim Nachdrucken, falls euch meine Arbeit gefällt würde ich mich sehr über eine Bewertung oder einen Boost freuen.<boostme><boosttitle>Boost Me</boosttitle></boostme>

<commercialme><commercialtitle>Membership</commercialtitle></commercialme>EXTENSION UPDATEFor everyone who uses my build plate holders, there is now a fantastic extension!Check it out, <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/2724492-drawer-extension-for-v5-ams-glass-slim-riser#profileId-3018644">here's the link!</a>&nbsp;&nbsp;UPDATENew print profile added with a build plate holder for 5 build plates!&nbsp;I designed a build plate holder here that is suitable for @Sanja3D 's (<a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/@Sanja3D">Sanja 3D | Published - MakerWorld</a>) V4 AMS Glass Slim RiserIt can be hung on the side and has space for 3 build platesThe print requires no supportsHave fun reprinting, if you like my work I would really appreciate a review or a boost<boostme><boosttitle>Boost Me</boosttitle></boostme>

Print Profile(8)

Description

Comment & Rating (116)

License

Remixes (3)