John Gooiker

cover

20250327_174750.jpg

20250327_172553.jpg

20250327_172020.jpg

20250327_172447.jpg

Sliding Tile Clock schematics assy with detail.png

Tile digit assy (need 4 times)

plate_1.png

Tile case assy (need 4 times)

plate_2.png

Hour Tenth Tiles

plate_3.png

Minute Tenth Tiles

plate_4.png

Hour and Minute Unit Tiles (need 2 times)

plate_5.png

Dot or Middle section assy

plate_6.png

Clock Case Bottom

plate_7.png

Clock Case Top

plate_8.png

20250327_174857.gif

Clock assy right.png

2025-03-22_86ae2078a961a.jpg

All plates and profiles 0.4 mm nozzle and 0.2 mm layer. No support neededTiles and DOT section require AMS (2 color)

PLA nozzle 0.4 mm, Layer 0.2mm, 2 walls, 15% infill

Clock assy round.png

0.2mm layer, 2 walls, 15% infill

Sliding Tile CLock is inspired upon the <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/131237-modaflip-a-retro-inspired-perpetual-calendar#profileId-148837">modaFLIP: a retro-inspired perpetual calendar</a>&nbsp;Controled by arduino Nano ESP and connected to internet NTPYou must turn the digits all to zero when you power up the clock.Some minor soldering is required.No glue is used. However you can apply to tile case if fit is to lose.&nbsp;Find instructions and program on <a target="_blank" rel="noopener noreferrer ugc" href="https://www.instructables.com/Sliding-Tile-Clock/">https://www.instructables.com/Sliding-Tile-Clock/</a>&nbsp;

Sliding Tile Clock

ASIA

Print Profile(2)

Description

Comment & Rating (0)

License

Related Models