Ikea TERTIAL improved 360 Degree mount

You need extra:
the head of my m3 scews is 5.4 mm wide
8 M3 screws with a 17 mm thread
6 M3 screws with a 25 mm thread
1 M3 screw with a 11 mm thread
1 M6 countersunk screws with a 25 mm thread
20 M3 screw nuts
1 m3 screw nut
6 M4 wood countersunk screws with a lenght of at least 15 mm

Printer settings
Side screw nuts.stl: Wall: 5; Top Layer 10; Bottom Layer 10; Infill 25 %
Side screws.stl: Wall: 5; Top Layer 10; Bottom Layer 10; Infill 25 %
Mount below.stl: Wall: 5; Top Layer 10; Bottom Layer 10; Infill 25 %
Mount Up.stl: 100% Infill

Assembly
horizontal vertical
1)Side screw nuts.stl: vertical (top) 3 M3x25mm screws (bottom) 6 m3 screw nuts
2)Side screws.stl: vertical (top) 3 M3x25mm screws (bottom) 6 m3 screw nuts
3)Mount below.stl: below M6 screw nut
4) screw the Mount below.stl on your Desk
5) Mount Up.stl: Top M6 Screw
---Push the both sides to the Mount and scew ist all together
6)Side screw nuts.stl: horizontal: 8 m3 screw nuts
7)Side screws.stl: horizontal: 8 m3 screws