Search models, users, collections, and posts
Print Profile(1)
0.2mm layer, 5 walls, 15% infill
Designer
34 min
1 plate
Open in Bambu Studio
Boost
4
5
0
0
4
1
Released
Bill of Materials
List other parts
- woodtablet x 1: https://www.depot-online.de/de/p/serviertablett-fji0040400
- neodymmagnets x 10: https://www.amazon.de/dp/B0CZRRQSR1?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Description
I made a small sunglass holder as a place for all the loose sunglasse around. You can either way glue it directly to the wall or mount it on a nice piece of wood like I did. On the backside of the wood i glued on some strong magnets to mount it on my fusebox which is in the hallway. Link for the other components in the BOM and below.
I printed it with PLA CF for a nice matte finish
https://www.depot-online.de/de/p/serviertablett-fji0040400
https://www.amazon.de/dp/B0CZRRQSR1?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Cheers
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (0)