ItsBryy3D

cover

IMG_6565.jpg

IMG_6562.jpg

IMG_6567.jpg

Black

plate_1.png

White

plate_2.png

Beige

plate_3.png

Green

plate_4.png

Gold or Yellow

plate_5.png

Dark Red

plate_6.png

plate_7.png

Dark Grey

plate_8.png

Orange

plate_9.png

2025-03-24_f1e17d257d66c.jpg

0.2mm layer, 2 walls, 10% infill

Black - back

plate_10.png

Black - Frame facedown for better surface

plate_11.png

Sage Prints and Design

Bowser vs Mario.jpg

Bowser.jpg

Bowser frame.jpg

This is sized to fit the H2D printer bed size so that way Bowser can be big and bad relative to the other size designs. &nbsp;I separated the frame from the back too so it can be printed face down and provide a better front surface quality that matches the rest of the pieces.  I suggest putting the frame down and then using a few of the pieces with the peg to align the frame then use some of the other ones with the pegs and glue those too the back with the loose frame / other pins as guide. Once those glued pins are set, slide the frame and loose pins back off. Then put some glue along the frame and slide over the already glued pins and push and hold against back until set. Then resume with placing / gluing the rest of the pieces in.

H2D sized - separated frame from back

scribbless

Bowser 2.jpg

Bowser 3.jpg

Bowser 1.jpg

Bowser 4.jpg

Scaled down to be about 6&#34; tall instead of the 8&#34; on the original, also scaled down the thickness.  Custom 2&#34; receiver insert model made with a receiver pin location sized to allow the model to stick out enough to clear the back bumper if your receiver isn&#39;t flush.  Model and receiver shaft are angled to print with minimal supports, but also ensuring layer lines were not in a way to cause a weak point between the face and the receiver insert.&nbsp;

Scaled Down & Updated to be a 2" Trailer Hitch Cover.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

PEACHES PEACHES PEACHES!! Come find me in the fire castle! Bowser multipart model, that does NOT require an AMS! This one was a fun one, and many people requested! ENJOY!&nbsp;Material Used: ALL PLA&nbsp;Bambu: Black and White and OrangePolymaker: Army BeigeOverture: Green JustMaker: Cherry RedPolymaker: Dark Grey Overture: Red Matte Feedback is welcome! ALWAYS!

Bowser (NO AMS) Wall Art

ASIA

Print Profile(3)

Description

Comment & Rating (142)

License

Related Models