Stich - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 96x170mm in size

Filaments Used:
PLA+ Sunlu Black 
PLA+ Sunlu Blue 
PLA+ Sunlu Sky Blue 
PLA+ Sunlu White 
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue
At layer #12 (1.04mm) swap to Sky Blue
At layer #15 (1.28mm) swap to White for the rest.

Frame Version:
At layer #25 (2.08mm) swap to Blue for the rest

For those who don't have an AMS or only have one, and the project uses more than four colors, you just need to replace the color changes with pauses and switch the filament manually.
 

If you wish to enlarge this project, you can freely scale the X and Y axes. However, it is crucial to keep the Z height at 100% (do not change it). This ensures that the filament color swaps remain at the correct layers; changing the height will break the color sequence and ruin the final result.

☕ Support my projects. A small gesture to help me create and test new models every day.