Caster swivel mobile wheel
Print Profile(2)
Description
3d printable caster wheel, holds quite a bit of weight.
Material needed:
x2 608 bearing in the wheel
a bunch of 6mm bb gun plastic pellets
x8 m3 8mm screw (5 is also fine)
See images for instruction
Boost Me (for free)
NOTE don't over tighten the top 3 screws. The piece is very small and if deformed it will rub against the base and not spin freely.
If installed correctly the top piece will spin like a fidget spinner.
If needed, you can put bit of lubricant grease on the bb balls and in between the 4 posts. It will be smoother.
Fixed wheel also available here: https://makerworld.com/en/models/904110
Too large? Here's a mini version! Only 20g per wheel
https://makerworld.com/models/1311768
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (42)