A bookmark of the river. Hueforge
Print Profile(1)
Description
Made a bookmark of the river using hueforge.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x50mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.5mm and the Actual Depth is 1.6mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Steel Grey Transmission Distance: 1
PLA PolyLite Blue Transmission Distance: 1
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Steel Grey
At layer #8 (0.72mm) swap to Blue
At layer #9 (0.8mm) swap to White for the rest.
If you like my models please boost.:)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)