The Pharaoh of the Plagues Hueforge

Project: The Plague Pharaoh.hfp
Print with 100% infill and a layer height of 0.08 mm, with a 0.24 mm base layer.

The model measures 150.05 x 200 mm.
You can print with higher layer heights, below the minimum depth of 0.48 mm.
The maximum depth is 3 mm and the actual depth is 3.1 mm.

Filaments used:
PLA Smart Recycled Black (Transmission distance: 0.5)
PLA Smart Recycled White (Transmission distance: 11)
PLA Sunlu Silk Gold (Transmission distance: 8.4)
This print uses 3 unique filaments.

Change instructions:
Start with Black.
At layer 5 (0.56 mm), change to Black.
At layer 7 (0.72 mm), change to White.
At layer 20 (1.76 mm), change to Silk Gold.
At layer 32 (2.72 mm), change to White for the rest.