Triple G Workshop

cover

2025-03-28_5j3p4cw1i4fp.jpg

2025-03-28_8rjnuf0yfpy3.jpg

2025-03-28_boxl5migr4k6.jpg

2025-03-28_kxotom8fng70.jpg

2025-03-28_mmaxpe1b0et9.jpg

2025-03-28_fpk71s9185fi.jpg

2025-03-28_wnbinkts7fnu.jpg

2025-03-28_c7fpq0wnisag.jpg

plate_1.png

2025-03-28_znldpkd7au51.jpg

Custom Supports 0.2mm layer, 2 walls, 15% infill

3D Print Concepts

2bd95def-dfb3-4bb5-a846-b9adf03f164f.png

<ul><li>BeCarefull WHEN REMOVING SUPPORTS!!</li><li>P1S: 0.4mm Stainless Steel Nuzzel Optimized!</li><li>0.2mm Layer</li><li>5 Walls For better strength </li><li>25% Infill Adaptive Cubic for less filement use and better strength</li><li>Tree Supports only on build plate! For the overhangs</li></ul>

Galaxy: 0.2mm layer, 3 walls, 20% infill, Supports Enabled

DrOpticsOdense

20250412_193024.jpg

20250412_193037.jpg

20250412_193052.jpg

20250412_193102.jpg

20250412_181307.jpg

20250412_181314.jpg

WARNING! Be very careful removing the supports on the sword, knife and between the legs! (I broke the feet off and had to glue them back on.)&nbsp;Print profile at 60% scale for 0.2mm nozzle and 0.06mm layer height.This gives maximum detail for a reasonably sized figure (around 40mm) without taking forever to print.&nbsp;I&#39;ve spent some time tuning in the support settings to avoid print failure due to issues with bed adhesion at this scale and layer height.The settings in this profile have given the best results on my A1 Mini with textured build plate (all I currently have).So, you may be able to get away with less robust settings on an XY core printer or with a different build plate type.&nbsp;There are minimal supports that are relatively easy to remove with some careful snipping of the stems and a little bit of patience.&nbsp;Main support settingsType: Tree (auto)Style: DefaultOn build plate only: YesSupport critical regions only: YesRemove small overhangs: YesInitial layer density: 100%Initial layer expansion: 10mmSupport wall loops: 2Support/object first layer gap: 0.10mmSupport speed: 50mm/sSupport interface speed: 50mm/s&nbsp;Other relevant settings:Initial layer height: 0.18mmSeam position: AlignedWall generator: ArachneWall loops: 3Infill: 5%, Gyroid

60% scale, 0.2mm nozzle, 0.06mm layer, 3 walls, 5% infill

6006034971002783579.jpg

6006034971002783569.jpg

6006034971002783571.jpg

6006034971002783572.jpg

6006034971002783589.jpg

Cut to half with a magnet hole (10mmx5mm but can be resized) for decor &amp; minimum support easy to remove, top surface ironing &amp; nearest seam for better front look, 0.2mm layer,2 walls,15% infill, slowed down 1st layer speeds and gapped brim for better plate adhesion

for decor, minimum support, 0.2mm layer,2 walls,15% infill

laakness

IMG_0796.jpeg

IMG_0795.jpeg

All the same settings as the original artist, just painted in Bambu Studio.

Painted Armor for AMS, 0.2mm layer, 2 walls, 15% infill

<boostme><boosttitle>Boost Me</boosttitle></boostme>A mighty owl-man adventurer with natural stealth and night-vision. Collect them all!  <figure class="image image_resized" style="width: 73.78%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001255249/design/2025-03-28_xxbijtneqrdc.jpg"></figure><figure class="image image_resized" style="width: 73.51%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001255249/design/2025-03-28_2ld8tkqzdsdp.jpg"></figure> Check out the FULL COLLECTION  HERE: <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/collections/5429990-owls-dragons">https://makerworld.com/en/collections/5429990-owls-dragons</a><figure class="image image_resized" style="width: 78.62%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001255249/design/2025-03-28_cfaqjapinfpv.jpg"></figure>Designed to print with Tree Supports on build plate only for EZ removal!Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)

The Samurai - Owls & Dragons

ASIA

Print Profile(5)

Description

Comment & Rating (259)

License

Related Models