Mac Miller - Best Day Ever
Print Profile(1)
Description
🔥 This is 1 of 5 FREE albums I post per artist. The rest live on my Patreon where members vote on what gets made next + get every file I've ever dropped.
Patreon → https://www.patreon.com/cw/TreeHouseRecords
Mac Miller - Best Day Ever
Other Mac Miller fanart can be found here: https://makerworld.com/en/@Noahs_A_Noobie/upload
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Hatchbox Purple Transmission Distance: 2.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments
Ignore if using AMS:
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Purple
At layer #9 (0.8mm) swap to Red
At layer #15 (1.28mm) swap to Yellow
At layer #21 (1.76mm) swap to Jade White for the rest.
Boost Me (for free)
🚀 You got a free boost just sitting there. Don't let it die. All boost are appreciated!
⚠️ These models are fan-made for personal printing and not for resale. Artists or rights holders who'd like a file removed can message me and I'll handle it immediately.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)