Nordic Warrior Hueforge
Print Profile(1)
Description
Boost Me (for free)
If you like this model, give me a boost; this will help me create more free models for you!
Print with 100% infill using a 0.08 mm layer height and a 0.24 mm base layer.
The model measures 151.5 x 200 mm.
You can print with higher layer heights, below the minimum depth of 0.48 mm.
The maximum depth is 3 mm and the actual depth is 2.9 mm.
Filaments used:
PLA Smart Recycled Black (Transmission distance: 0.5)
PLA Winkle Ash Grey (Transmission distance: 5.9)
PLA Smart Recycled White (Transmission distance: 11)
This print uses 3 unique filaments.
Change instructions:
Start with the black filament.
At layer 7 (0.72 mm), change to Ash Grey.
At layer 20 (1.76 mm), change to White for the remainder.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)