Hueforge Outer Banks

Greetings everyone,

Here is a Hueforge of Outer Banks in 160x250mm format.

It's not very clear in the photos, but the black is actually violet because I used violet filament, but feel free to use any color you like :)

Print at 100% infill with a 0.08mm layer height and a 0.16mm base layer

The model measures 160.16x250mm
You may print at higher layer heights below the minimum depth of 0.24mm
The maximum depth is 2mm and the actual depth is 2.1mm

This print utilizes four distinct filaments

Swap Instructions:
    Begin with Black
    At layer #5 (0.48mm) switch to Lavender Blue
    At layer #8 (0.72mm) switch to Gray
    At layer #13 (1.12mm) switch to White for the remainder.