Search models, users, collections, and posts
Jesse Mendez NCAA Wrestling National Champ
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
4.9 h
1 plate
Open in Bambu Studio
Boost
6
3
1
1
3
0
Released
Description
Jesse Mendez NCAA Wrestling National Champ
Project: jesse nc.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 159.96x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA Jessie Premium Overcast Grey Glitter Transmission Distance: 0.8
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #15 (1.28mm) swap to Overcast Grey Glitter
At layer #16 (1.36mm) swap to White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (1)