Quick release poop bin -H2D/H2S/H2C

This model is a rear quick-release poop bin for the Bambu Lab H2D printer, with dimensions: 100*60*120mm

It is a very convenient and practical poop bin

Features:

• Convenient and practical, perfectly compatible, fixed using only the machine's own screws
• Fast printing, all parts require no supports at all
• Sloped chamfer design, no material jams at all, slides down extremely smoothly
• Quick and easy to assemble and disassemble, with a limit structure, stable and fast
• Large internal space in the poop bin, no need to frequently dump waste, combined with the machine's own detection function, perfectly realizes its purpose
• Top grille design, aesthetic while preventing waste from flying around
• Recessed design in the lower half, will not affect heat dissipation of the machine's circuit board
• If you need the P1S/P2S version, you can click here to visit (Quick-Release Poop Bin (P1S/P2S))

Installation Method:

1. After printing, loosen the two screws at the arrowed positions in the image
2. Fix the baffle using the two removed screws (note the direction), the screws just need to stably secure the baffle, do not overtighten
3. It is highly recommended to print with high-temperature resistant materials such as ABS/ASA to prevent the model from softening due to excessive chamber temperature
4. Hang the poop bin and it's ready to use

*2025.4.2 Update: Regarding the reported issue of screws easily being damaged when tightened forcefully, comprehensive improvements have been made from the model to the print profile, increasing the thickness of the screw areas in the model and adding more bottom shell layers in the print profile

*2025.5.11 Added: A fully enclosed version has been added to the print profile (the main body remains unchanged, only a lid and enclosed baffle have been added), effectively reducing odor overflow, suitable for frequent printing with odorous materials, be sure to print with high-temperature resistant materials (the internal temperature of the enclosed version will be roughly similar to the chamber temperature, tests have shown that materials like PLA will certainly soften)

*2025.10.28 Update: New large capacity poop bin added, a complete set has been uploaded (including poop bin, lid, and perforated baffle), this option is available for those with large capacity needs Fine-tuned the perforated plate and the enclosed poop bin and baffle to allow smoother sliding into the poop bin during use, greatly reducing material clogging at the slide rail Fine-tuned the poop bin height to ensure a tighter seal after the lid is closed Added resistance strips to the lid The enclosed version retains some perforated patterns for a more aesthetic look

*Considering the durability of the model, the poop bin uses a wall thickness of 2.5mm, making it stronger while also eliminating resonance from the machine

Hope this is helpful to you