sassifuma79

cover

1704528134123_aecdea84-ed76-4313-8360-34efcdb5f2ee.jpg

1704528134085_45058aa9-80a8-4cff-a34c-a18f2f483e14.jpg

plate_1.png

plate_2.png

plate_3.png

PrintyPrinty

IMG_4192.jpg

I created a 3mf profile for this great model, to make it straight forward to print and to ensure you don't run into the same issues I did (such as a the seam spoiling the graphic face of the outer tube.) Plate 1 is 4 outer cups. 0.2mm layer height. Reduced visible seams with scarf seams.&nbsp;Plate 2 is the container top and bottom. Again 0.2mm layer height, reduced visibility of seams with scarf seams. The model is rotate 90 degrees so that the seams are on the side and don't interfere with the graphic.&nbsp;Plate 3 is the inner cup. I selected the correct size cup and the plate is printed in spiral vase mode. Print 4 times with different colour. I used PLA and glued the inner into the outer.

0.2mm layer, 2 walls, 15% infill

Liar&#39;s Dice Pirates of the Caribbean

Liar's Dice (game Jack Sparrow-Pirates  Caribbean)

ASIA

Print Profile(1)

Description

Comment & Rating (23)

License

Related Models