Warhammer 40K Black Templar Bolter

Warhammer 40K Black Templar Bolter, approximately 50CM in length

Due to time constraints, the bolter body is released first, the base will be released later

Assembly Instructions:

A manual brim has been added here to mitigate warping. Removal might be slightly challenging; you can also omit it by separating and deleting the object

• Initially try assembling the small decorative pieces without adhesive, as the gap size may vary due to differences in printers and filaments
• Pre-assemble the parts once before gluing to ensure correct orientation
• The default print settings are configured for optimal print quality and reduced failure rates, with some parts set for individual printing. To reduce the number of plates and printing time, individual printing can be disabled and parts of the same color can be combined on the same plate

Glue Bonding Tips：For beginners, we recommend using 409 adhesive with a small dropper (usually included with the adhesive). Its lower fluidity makes it easier to control. Using too much glue is unnecessary; a moderate amount provides strong bonding. Many parts are designed for mutual constraint, minimizing the risk of disassembly. Excessive glue may cause overflow during assembly, affecting aesthetics. Avoid applying glue to part edges to prevent overflow during joining

During bonding, use clamps or weights to secure the assembled parts and minimize gaps

Patiently wait for the adhesive to fully cure before proceeding

Like this model? Please give it a thumbs up!

👀 For fans of this model type, remember to follow for timely updates on upcoming releases, development progress, and opportunities to share valuable feedback.

update: 2025/04/02

Added A1 MINI print profile, supplemental image descriptions:

Assembly Process Documentation: