Search models, users, collections, and posts
Retro Style Mini-ITX PC Case
IP Report
Print Profile(2)
0.2mm layer, 4 walls, 40% infill
Designer
34 h
9 plates
Single front panel For H2D & H2S only. 15% Infill
23.9 h
9 plates
Open in Bambu Studio
Boost
611
1390
14
34
461
27
Released
Bill of Materials
Maker's Supply Kits and Parts
Select all
List other parts
- 6#-32x6 Screw x 4:
- 5mm Through-hole LED x 2: Different color
- Mechanical keyboard switches x 2:
- Female jumper cable x 8:
- Wires x 1:
Description
Features
- Support Mini-ITX motherboard
- Support ATX size PSU
- Support air cooler up to 50mm
- Support one 3.5 inch front bay for front I/O, or a floppy drive if you like :)
- No extra fan needed. All air flow is contributed by the CPU cooler and the PSU fan.
- Does not support discrete GPU
- There is no dedicated 2.5 disk slot, but I left plenty space above the PSU, where SATA SSD can be taped
Tools and Material you will need
- About 1kg of filament
- 39 M3×4mm insert (get the kit that comes with a heat pressing tool)
- 33 M3×8mm screw
- 8 M3×12mm screw
- 4 #6-32 UNC screw for PSU mounting
- 2 keyboard switches for Power and Reset
- 2 5mm through hole LEDs and 2 4.7K ohm resistors
- Some wire and female jumper cable
- A soldering iron to heat press the M3 inserts and connect wires
- A 3.5 inch front I/O module
- Super glue
A detailed instruction is in the files.
Documentation (2)
Assembly Guide (2)
Instruction.pdf
License
This user content is licensed under a
Creative Commons Attribution-Share Alike
Comment & Rating (14)