KG3Dee

cover

under_496dc3f6-f2ea-482c-a31e-2ccce154987d.png

front_ffde9cf4-79a4-4c1b-8ee4-750421e0df07.png

print2_a6cba90c-960c-4e3b-bd07-5248715a31c2.png

both_daf7469e-3228-40cf-bba7-66fe0b4993ed.png

Holder_30337291-96e4-48b7-94fb-92f8c4ff2ab6.png

slicer_11de8af8-bf40-4ff7-b8b1-06565d9a76e1.png

dim_850e19a5-c720-425c-96d3-3a4e508851ee.png

PETG Laptop holder BOTH

plate_1.png

LEFT only

plate_2.png

RIGHT only

plate_3.png

print_2fea501a-3d1a-4a5b-b03e-281fa1344666.webp

PETG, 0.2mm layer, 3 walls, 15% infill, 10mm brim

thelanlegend

plate_1.webp

plate_2.webp

plate_3.webp

IMG_5741_b33fff4a-1ba5-4896-b104-12320587cc0f.webp

Scaled down for ~1" laptop. Had to increase the brim and leave the door open on the P1S to complete the print successfully. Otherwise it would get to around 80% and come free of the bed.

Scaled for 1" Laptop, 0.6mm nozzle, 0.36mm layer, 3 walls, 15% infill, 12mm Brim

4065628911

IMG_1897.JPEG

PLA A1 mini 150mm length, 0.2mm layer, 3 walls, 15% infill

Jaysinthesun

IMG_1309_41902a9a-1776-4f45-8b81-a745f1f7b828.webp

Mirrored part. Reduced # of Walls as most laptops don't weigh enough to need the additional strength of 6 walls. Also, if you want to push the print speed to the limit, modify your filament settings to increase the hotend temp by 5ish degrees, increase flow from .95 to 1, and set fan aux and part fan speed to 20%. I printed using Bambu Lab PETG-CF in Sport mode. Overhangs were a bit sloppy on the larger openings, but the smaller walls turned out beautifully. I kept my printer enclosed to minimize the chances of the part coming off the bed.

High Speed-PETG-CF-0.28mm layer, 4 walls, 15% infill

Chase Curtis

IMG_2397.jpg

IMG_2400.jpg

IMG_2396.jpg

IMG_2399.jpg

Recommend PETG or other higher temp resistant filaments. However, PLA is strong enough to hold the weight if temp isn't an issue.

IKEA Skadis Laptop Holder

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Well ventilated under desk laptop holder.No supports needed.I printed at 0.2mm layer height, 3 walls and 15% gyroid infill. Add brim for better bed adhesion.You will need to clone the part and mirror it for the other side. (Left/Right version)Recommend PETG or other higher temp resistant filaments.&nbsp;A version for IKEA Skadis made by Chase Curtis can be found in the print profiles.&nbsp;&nbsp;

Print Profile(5)

Description

Comment & Rating (378)

License

Remixes (2)
(Created before license restrict)

Related Models