Kratos in flames hueforge
Print Profile(1)
Description
Boost Me (for free)
If you like this model, give me a boost; this will help me create more free models for you!
Project: Kratos.hfp
Print with 100% infill using a 0.08 mm layer height and a 0.24 mm base layer.
The model measures 117.85 x 200 mm.
You can print with layer heights above the minimum depth of 0.48 mm.
The maximum depth is 2.2 mm and the actual depth is 2.3 mm.
Filaments used:
Black Smart Recycled PLA (Transmission distance: 0.5)
Ash Grey Winkle PLA (Transmission distance: 5.9)
White Smart Recycled PLA (Transmission distance: 11)
Red Premium Plus Filex PLA (Transmission distance: 8.1)
Yellow Smart Recycled PLA (Transmission distance: 9.3)
This print uses 5 unique filaments.
Switching instructions:
5 colors in 4-color AMS
Start with Black.
At layer 5 (0.56 mm), switch to Ash Grey.
At layer 9 (0.88 mm), switch to White.
At layer 11 pause, remove Grey filament from AMS and insert Yellow
At layer 14 (1.28 mm), switch to Black
At layer 15 (1.36 mm), switch to Red.
At layer 21 (1.84 mm), switch to Grey on the bed (Yellow will be in the AMS).
At layer 22 (1.92 mm), switch to White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)