Steamboat Tissue Box (v1.1)
Print Profile(2)
Description
v1.1
- Fixed the bottom defect
- Adjusted the height of the bow
- Removed the double roof of the cabin
ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
v1.0
Let's sail!
Assembly Instructions
1. Tap hard to put the roof in place.
2. Installing the chimney, not to use too much force.
Turn it over and see if it is flush with the bottom.
3. When installing the whistle, pay attention to the strength.
Installed like this:
4. Place the deck flat on the table, align the cabin with the deck hole, and press down.
It should look like this:
5. Find a pack of tissue, the size I referenced was about 9x13x5cm.
Stuff the tissue pack into the cabin and pull out half of it and pass it through the chimney.
6. Press the deck into the hull, pay attention to the position, only press the deck, not the cabin.
7. Done!
If it is a new tissue, the boat will be lifted up when you pull it out. You can put some heavy objects on the bottom of the boat. After pulling out ⅓, it will be smooth.
Boost Me (for free)
to speed up my creation
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (24)